Hot-rolled bars
Hot-rolled bars
|
Alloy |
Delivery conditions |
|---|---|
|
Gr1, Gr2, Gr3, Gr4, T40, 3.7024.1, 3.7064.1 |
ASTM B 348, ASTM F 67, ISO 5832/2, ASNA 3305, ASME SB 348, AMS 4921, BS 2TA8, WL3.7024, WL3.7034, WL3.7064 |
|
Gr 7, Gr23, Ti6Al4VELI |
ASTM B 348, ASTM F136, AMS 4930, TPC-P-114, Di- 1037, ASME SB 348 |
|
Gr9 |
ASTM B 348, ASME SB 348 |
|
GR5, 3.7164.1, 3.7165.1, 6Al4V, TA6V |
ASTM B 348, DIN17862, DIN65040, DIN 65174, ZBF504514, WL3.7164/2, ISO5832/3, AMS 4928, ASTM F 1472, ASME SB 348, BS 7252/3, MIL-T-9047, ASNA 3307, AIR 9183,OFWN 7000,BS2TA11, BS2TA12,BS2TA13, MP-Z-T1/7, C50TF22, PWA 1228, CPW41, MSRR8610, DMD0778-24,DMD0776-24,DMD 0784-24,EMS54924,EMS52325, MPM 071,TPC-P-107,TPC-P-112,DI 1034, MTS 1006-3, |
|
4Al-4Mo-2Sn |
Bs2TA45, BS2TA47, C50TF113, DTD5343, S480, WL3.7184, C50TF119 |
|
8Al-8Mo-1V |
C50TF26, AMS 4972, AMS 4973 |
|
6Al7Nb |
ASTM F1295, SNO56512, TPS-P-110, ISO5832/11 |
|
10V-2Fe-3Al |
BMS 7-260, AMS 4983, AMS 4984 |
|
6Al-6V-2Sn |
AMS 4971, AMS 4978, MIL-T-9047 |
|
6Al-2Sn-4Zr-2Mo |
AMS 4975, AMS 4976, DMD 0710-24 |
|
VST 55531 |
AIMS 03-18-008 |
Bars are delivered as hot-rolled or as heat-treated, with the surface machined or grinded. Finished bars are subject to 100% ultrasonic testing.
Range
|
Diameter, mm |
Length, mm |
Bar diameter tolerance, mm |
|---|---|---|
|
from 6.985 to 14.98 |
up to 2743.2 |
± 0,50 |
|
from 14.98 to 50.80 |
up to 5791.2 |
± 0,076 |
|
from 50.80 to 101.6 |
up to 4876.8 |
± 0,101 |